ntpd -gnqd
ntpd 4.2.2p1@1.1570-o Fri Jul 22 18:07:53 UTC 2011 (1)
addto_syslog: precision = 1.000 usec
create_sockets(123)
addto_syslog: no IPv6 interfaces found
addto_syslog: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
addto_syslog: bind() fd 16, family 2, port 123, addr 0.0.0.0, in_classd=0 flags=9 fails: Address already in use
addto_syslog: bind() fd 16, family 2, port 123, addr 127.0.0.1, in_classd=0 flags=5 fails: Address already in use
addto_syslog: bind() fd 16, family 2, port 123, addr 192.168.xxx.xxx, in_classd=0 flags=25 fails: Address already in use
init_io: maxactivefd 0
local_clock: time 0 base 0.000000 offset 0.000000 freq 0.000 state 0
addto_syslog: getaddrinfo: "::1" invalid host address, ignored
getaddrinfo: "::1" invalid host address, ignored.
key_expire: at 0
peer_clear: at 0 next 1 assoc ID 8694 refid INIT
newpeer: 192.168.xxx.xxx->192.168.xxx.xxx mode 3 vers 4 poll 6 10 flags 0x281 0x1 ttl 0 key 00000000
key_expire: at 0
peer_clear: at 0 next 2 assoc ID 8695 refid INIT
newpeer: 127.0.0.1->127.127.1.0 mode 3 vers 4 poll 6 10 flags 0x1221 0x1 ttl 0 key 00000000
addto_syslog: frequency initialized 26.675 PPM from /var/lib/ntp/drift
local_clock: time 0 base 0.000000 offset 0.000000 freq 26.675 state 1
report_event: system event 'event_restart' (0x01) status 'sync_alarm, sync_unspec, 1 event, event_unspec' (0xc010)
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 1 192.168.xxx.xxx->192.168.xxx.xxx mode 3
auth_agekeys: at 1 keys 1 expired 0
timer: refresh ts 0
refclock_transmit: at 2 127.127.1.0
refclock_receive: at 2 127.127.1.0
peer LOCAL(0) event 'event_reach' (0x84) status 'unreach, conf, 1 event, event_reach' (0x8014)
refclock_sample: n 1 offset 0.000000 disp 0.010000 jitter 0.000001
clock_filter: n 1 off 0.000000 del 0.000000 dsp 7.937500 jit 0.000001, age 0
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 3 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 5 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 7 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 9 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 11 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 13 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 15 192.168.xxx.xxx->192.168.xxx.xxx mode 3
addto_syslog: sendto(192.168.xxx.xxx) (fd=-1): Bad file descriptor
transmit: at 17 192.168.xxx.xxx->192.168.xxx.xxx mode 3
Original: https://www.cnblogs.com/kerrycode/p/14776429.html
Author: 潇湘隐者
Title: ntpd dead but pid file exists
原创文章受到原创版权保护。转载请注明出处：https://www.johngo689.com/546378/
转载文章受原作者版权保护。转载请注明原作者出处！