AT24C02是一款拥有256bytes(32Page)的EEPROM.
一 ：特点（部分）
1：双线接口；
2：双向数据传输协议；
3：400KHz波特率；
4：硬件写保护；
5：最大5ms写入同步；
6：100万次写操作；
7：100年数据存储。
基本框图
二：绝对参数
三：引脚定义
四：读写操作
AT24C02使用I2C进行读写操作，最大波特率为400KHz。
1：设备地址
设备地址由7bits组成，其中高4位默认为1010b,低三位由A0~A2控制。
2：写操作
1）单字节写
AT24C02单字节写，需要先写入设备地址，之后写入内存地址，最后写入数据。当IIC最后产生STOP模式后，AT24C02将会进入最大5ms的同步时间，此时无法对AT24C02进行操作。
写入时序如下：
2）页写
AT24C02支持按页写操作，每页最大8个字节，一共32页。当进行按页写的时候，AT24C02内存地址会自动增加，如果地址已经是本页的最后地址，但是写操作还未完成，则地址会返回本页起始地址，数据将会覆盖。
3：读操作
AT24C02支持当前地址读取，任意地址读取，连续读取。
1）当前地址读取
AT24C02在上电的时候，每次读写操作，都会自动同步地址。当使用IIC读取数据时，如果在写入设备地址时进行读操作，会读取当前同步地址的值。
2）任意地址读取
AT24C02任意地址读取即为单字节读取。在写完设备地址，内存地址后，进行重起始操作，对数据进行读取。
3）连续读取
AT24C02连续读取时，在读取第一个字节后，IIC不产生STOP条件，则AT24C02会继续传出数据，同时内存地址会自动更新，直到读取到设备的最大地址后，如果继续读取，则会读取设备内存的首地址值。
五：代码参考（IIC 阻塞读写）–.c文件
1 #include "at24c02.h" 2 3 4 #define AT24C02_ADDR (0xA0) 5 6 7 uint8_t at24c02_write_buf[AT24C02_MAX_BYTE_NUM] = {0}; 8 uint8_t at24c02_read_buf[AT24C02_MAX_BYTE_NUM] = {0}; 9 10 11 /** 12 * @brief AT24C02 write data. 13 * @param page, AT24C02 write page. 14 data, Write data buffer. 15 * @retval H_SUCCESS or H_ERROR. 16 */ 17 H_STATUS_T Fn_AT24C02_WriteByte(uint8_t addr, uint8_t data) 18 { 19 uint8_t write_byte[1] = {data}; 20 HAL_StatusTypeDef status = HAL_OK; 21 22 status = HAL_I2C_Mem_Write(&hi2c1, AT24C02_ADDR, addr, I2C_MEMADD_SIZE_8BIT, write_byte, 1, 0xFF); 23 24 if(status != HAL_OK) 25 { 26 return H_ERROR; 27 } 28 29 return H_SUCCESS; 30 } 31 32 33 /** 34 * @brief AT24C02 write page data. 35 * @param page, AT24C02 write page. 36 pData, Write data buffer. 37 len, Write data length. 38 * @retval H_SUCCESS or H_ERROR. 39 */ 40 H_STATUS_T Fn_AT24C02_WritePage(H_AT24C02_PAGE_T page, uint8_t* pData, uint8_t len) 41 { 42 HAL_StatusTypeDef status = HAL_OK; 43 uint8_t page_addr = (uint8_t)page; 44 45 H_PARA_ASSERT((pData == NULL) || (len > AT24C02_PAGE_SIZE)); 46 47 status = HAL_I2C_Mem_Write(&hi2c1, AT24C02_ADDR, page_addr, I2C_MEMADD_SIZE_8BIT, pData, len, 0xFFFF); 48 49 if(status != HAL_OK) 50 { 51 return H_ERROR; 52 } 53 54 return H_SUCCESS; 55 } 56 57 58 /** 59 * @brief AT24C02 write serial data. 60 * @param addr, AT24C02 write data memory. 61 pData, Write data buffer. 62 len, Write data length. 63 * @retval H_SUCCESS or H_ERROR. 64 */ 65 H_STATUS_T Fn_AT24C02_WriteData(uint8_t addr, uint8_t* pData, uint16_t len) 66 { 67 uint8_t start_page_remain = 0; 68 uint8_t remain_page_num = 0; 69 uint8_t write_num = 0; 70 uint32_t i = 0; 71 72 H_PARA_ASSERT(((AT24C02_MAX_BYTE_NUM - (addr + 1)) < len) || (pData == NULL)); 73 74 /* How many memory remain for start page */ 75 start_page_remain = AT24C02_PAGE_SIZE - addr % AT24C02_PAGE_SIZE; 76 77 /* Write first page */ 78 write_num = len > start_page_remain ? start_page_remain : len; 79 for(i = 0; i < write_num; i++) 80 { 81 if(H_SUCCESS != Fn_AT24C02_WriteByte(addr++, *pData++)) 82 { 83 return H_ERROR; 84 } 85 len--; 86 87 /* For auto sync write */ 88 Fn_DelayMs(5); 89 } 90 91 /* Write completely */ 92 if(len == 0) 93 { 94 return H_SUCCESS; 95 } 96 97 /* How many completely page to write */ 98 remain_page_num = len / AT24C02_PAGE_SIZE; 99 100 for(i = 0; i < remain_page_num; i++) 101 { 102 if(H_SUCCESS != Fn_AT24C02_WritePage((H_AT24C02_PAGE_T)addr, pData, AT24C02_PAGE_SIZE)) 103 { 104 return H_ERROR; 105 } 106 107 addr += AT24C02_PAGE_SIZE; 108 pData += AT24C02_PAGE_SIZE; 109 len -= AT24C02_PAGE_SIZE; 110 111 /* For auto sync write */ 112 Fn_DelayMs(5); 113 } 114 115 /* Write cpm */ 116 if(len == 0) 117 { 118 return H_SUCCESS; 119 } 120 121 /* Last page remain number */ 122 if(H_SUCCESS != Fn_AT24C02_WritePage((H_AT24C02_PAGE_T)addr, pData, len)) 123 { 124 return H_ERROR; 125 } 126 127 /* Note: if called Read function after this function, Please insert a delay time between write / read */ 128 return H_SUCCESS; 129 } 130 131 132 /** 133 * @brief AT24C02 read current address data. 134 * @param pData, Read data buffer. 135 * @retval H_SUCCESS or H_ERROR. 136 */ 137 H_STATUS_T Fn_AT24C02_ReadCurrentByte(uint8_t *pData) 138 { 139 H_PARA_ASSERT(pData == NULL); 140 141 if(HAL_OK != HAL_I2C_Master_Receive(&hi2c1, AT24C02_ADDR, pData, 1, 0xFF)) 142 { 143 return H_ERROR; 144 } 145 146 return H_SUCCESS; 147 } 148 149 150 /** 151 * @brief AT24C02 read a byte. 152 * @param addr, AT24C02 read data memory. 153 pData, Read data buffer. 154 * @retval H_SUCCESS or H_ERROR. 155 */ 156 H_STATUS_T Fn_AT24C02_ReadByte(uint8_t addr, uint8_t *pData) 157 { 158 H_PARA_ASSERT(pData == NULL); 159 160 if(HAL_OK != HAL_I2C_Mem_Read(&hi2c1, AT24C02_ADDR, addr, I2C_MEMADD_SIZE_8BIT, pData, 1, 0xFF)) 161 { 162 return H_ERROR; 163 } 164 165 return H_SUCCESS; 166 } 167 168 169 /** 170 * @brief AT24C02 read serial data. 171 * @param addr, AT24C02 read data memory. 172 pData, Read data buffer. 173 len, Read data length. 174 * @retval H_SUCCESS or H_ERROR. 175 */ 176 H_STATUS_T Fn_AT24C02_ReadData(uint8_t addr, uint8_t *pData, uint16_t len) 177 { 178 H_PARA_ASSERT((pData == NULL) || (len > AT24C02_MAX_BYTE_NUM)); 179 180 if(HAL_OK != HAL_I2C_Mem_Read(&hi2c1, AT24C02_ADDR, addr, I2C_MEMADD_SIZE_8BIT, pData, len, 0xFFFF)) 181 { 182 return H_ERROR; 183 } 184 185 return H_SUCCESS; 186 } 187 188 189 /** 190 * @brief AT24C02 clear memory data. 191 * @param None. 192 * @retval H_SUCCESS or H_ERROR. 193 */ 194 H_STATUS_T Fn_AT24C02_ClearMemData(void) 195 { 196 uint32_t i = 0; 197 uint8_t page_addr = 0x00; 198 uint8_t data[AT24C02_PAGE_SIZE] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; 199 200 for(i = 0; i < AT24C02_PAGE_NUM; i++) 201 { 202 if(H_SUCCESS != Fn_AT24C02_WritePage((H_AT24C02_PAGE_T)page_addr, data, AT24C02_PAGE_SIZE)) 203 { 204 return H_ERROR; 205 } 206 207 page_addr += AT24C02_PAGE_SIZE; 208 209 /* For auto sync write */ 210 Fn_DelayMs(5); 211 } 212 213 return H_SUCCESS; 214 }
六：代码参考：.h文件
1 #ifndef __AT24C02_H__
2 #define __AT24C02_H__
3
4
5 #include "iic.h"
6
7 #define AT24C02_BASE_ADDR (0x00)
8
9 #define AT24C02_PAGE_SIZE (0x08)
10
11 #define AT24C02_PAGE_NUM (32)
12
13 #define AT24C02_MAX_BYTE_NUM (256)
14
15 #define AT24C02_MAX_MEM_ADDR (0xFF)
16
17 typedef enum
18 {
19 AT24C02_PAGE0 = AT24C02_BASE_ADDR + 0 * AT24C02_PAGE_SIZE,
20 AT24C02_PAGE1 = AT24C02_BASE_ADDR + 1 * AT24C02_PAGE_SIZE,
21 AT24C02_PAGE2 = AT24C02_BASE_ADDR + 2 * AT24C02_PAGE_SIZE,
22 AT24C02_PAGE3 = AT24C02_BASE_ADDR + 3 * AT24C02_PAGE_SIZE,
23 AT24C02_PAGE4 = AT24C02_BASE_ADDR + 4 * AT24C02_PAGE_SIZE,
24 AT24C02_PAGE5 = AT24C02_BASE_ADDR + 5 * AT24C02_PAGE_SIZE,
25 AT24C02_PAGE6 = AT24C02_BASE_ADDR + 6 * AT24C02_PAGE_SIZE,
26 AT24C02_PAGE7 = AT24C02_BASE_ADDR + 7 * AT24C02_PAGE_SIZE,
27 AT24C02_PAGE8 = AT24C02_BASE_ADDR + 8 * AT24C02_PAGE_SIZE,
28 AT24C02_PAGE9 = AT24C02_BASE_ADDR + 9 * AT24C02_PAGE_SIZE,
29 AT24C02_PAGE10 = AT24C02_BASE_ADDR + 10 * AT24C02_PAGE_SIZE,
30 AT24C02_PAGE11 = AT24C02_BASE_ADDR + 11 * AT24C02_PAGE_SIZE,
31 AT24C02_PAGE12 = AT24C02_BASE_ADDR + 12 * AT24C02_PAGE_SIZE,
32 AT24C02_PAGE13 = AT24C02_BASE_ADDR + 13 * AT24C02_PAGE_SIZE,
33 AT24C02_PAGE14 = AT24C02_BASE_ADDR + 14 * AT24C02_PAGE_SIZE,
34 AT24C02_PAGE15 = AT24C02_BASE_ADDR + 15 * AT24C02_PAGE_SIZE,
35 AT24C02_PAGE16 = AT24C02_BASE_ADDR + 16 * AT24C02_PAGE_SIZE,
36 AT24C02_PAGE17 = AT24C02_BASE_ADDR + 17 * AT24C02_PAGE_SIZE,
37 AT24C02_PAGE18 = AT24C02_BASE_ADDR + 18 * AT24C02_PAGE_SIZE,
38 AT24C02_PAGE19 = AT24C02_BASE_ADDR + 19 * AT24C02_PAGE_SIZE,
39 AT24C02_PAGE20 = AT24C02_BASE_ADDR + 20 * AT24C02_PAGE_SIZE,
40 AT24C02_PAGE21 = AT24C02_BASE_ADDR + 21 * AT24C02_PAGE_SIZE,
41 AT24C02_PAGE22 = AT24C02_BASE_ADDR + 22 * AT24C02_PAGE_SIZE,
42 AT24C02_PAGE23 = AT24C02_BASE_ADDR + 23 * AT24C02_PAGE_SIZE,
43 AT24C02_PAGE24 = AT24C02_BASE_ADDR + 24 * AT24C02_PAGE_SIZE,
44 AT24C02_PAGE25 = AT24C02_BASE_ADDR + 25 * AT24C02_PAGE_SIZE,
45 AT24C02_PAGE26 = AT24C02_BASE_ADDR + 26 * AT24C02_PAGE_SIZE,
46 AT24C02_PAGE27 = AT24C02_BASE_ADDR + 27 * AT24C02_PAGE_SIZE,
47 AT24C02_PAGE28 = AT24C02_BASE_ADDR + 28 * AT24C02_PAGE_SIZE,
48 AT24C02_PAGE29 = AT24C02_BASE_ADDR + 29 * AT24C02_PAGE_SIZE,
49 AT24C02_PAGE30 = AT24C02_BASE_ADDR + 30 * AT24C02_PAGE_SIZE,
50 AT24C02_PAGE31 = AT24C02_BASE_ADDR + 31 * AT24C02_PAGE_SIZE,
51 }H_AT24C02_PAGE_T;
52
53
54
55 /**
56 * @brief AT24C02 write data.
57 * @param page, AT24C02 write page.
58 data, Write data buffer.
59 * @retval H_SUCCESS or H_ERROR.
60 */
61 H_STATUS_T Fn_AT24C02_WriteByte(uint8_t addr, uint8_t data);
62
63
64 /**
65 * @brief AT24C02 write page data.
66 * @param page, AT24C02 write page.
67 pData, Write data buffer.
68 len, Write data length.
69 * @retval H_SUCCESS or H_ERROR.
70 */
71 H_STATUS_T Fn_AT24C02_WritePage(H_AT24C02_PAGE_T page, uint8_t* pData, uint8_t len);
72
73
74 /**
75 * @brief AT24C02 write serial data.
76 * @param addr, AT24C02 write data memory.
77 pData, Write data buffer.
78 len, Write data length.
79 * @retval H_SUCCESS or H_ERROR.
80 */
81 H_STATUS_T Fn_AT24C02_WriteData(uint8_t addr, uint8_t* pData, uint16_t len);
82
83
84 /**
85 * @brief AT24C02 read current address data.
86 * @param pData, Read data buffer.
87 * @retval H_SUCCESS or H_ERROR.
88 */
89 H_STATUS_T Fn_AT24C02_ReadCurrentByte(uint8_t *pData);
90
91
92 /**
93 * @brief AT24C02 read a byte.
94 * @param addr, AT24C02 read data memory.
95 pData, Read data buffer.
96 * @retval H_SUCCESS or H_ERROR.
97 */
98 H_STATUS_T Fn_AT24C02_ReadByte(uint8_t addr, uint8_t *pData);
99
100
101 /**
102 * @brief AT24C02 read serial data.
103 * @param addr, AT24C02 read data memory.
104 pData, Read data buffer.
105 len, Read data length.
106 * @retval H_SUCCESS or H_ERROR.
107 */
108 H_STATUS_T Fn_AT24C02_ReadData(uint8_t addr, uint8_t *pData, uint16_t len);
109
110
111 /**
112 * @brief AT24C02 clear memory data.
113 * @param None.
114 * @retval H_SUCCESS or H_ERROR.
115 */
116 H_STATUS_T Fn_AT24C02_ClearMemData(void);
117
118
119 extern uint8_t at24c02_write_buf[AT24C02_MAX_BYTE_NUM];
120 extern uint8_t at24c02_read_buf[AT24C02_MAX_BYTE_NUM];
121
122
123 #endif
Original: https://www.cnblogs.com/gigben/p/16818351.html
Author: GigBen
Title: AT24C02 by stm32f103 hal
原创文章受到原创版权保护。转载请注明出处：https://www.johngo689.com/800218/
转载文章受原作者版权保护。转载请注明原作者出处！