help 为该命令的帮助信息。
实例ip link show # 显示网络接口信息
ip link set eth0 up # 开启网卡
ip link set eth0 down # 关闭网卡
ip link set eth0 promisc on # 开启网卡的混合模式
ip link set eth0 promisc offi # 关闭网卡的混个模式
ip link set eth0 txqueuelen 1200 # 设置网卡队列长度
ip link set eth0 mtu 1400 # 设置网卡最大传输单元
ip addr show # 显示网卡IP信息
ip addr add 192.168.0.1/24 dev eth0 # 设置eth0网卡IP地址192.168.0.1
ip addr del 192.168.0.1/24 dev eth0 # 删除eth0网卡IP地址
ip route show # 显示系统路由
ip route add default via 192.168.1.254 # 设置系统默认路由
ip route list # 查看路由信息
ip route add 192.168.4.0/24 via 192.168.0.254 dev eth0 # 设置192.168.4.0网段的网关为192.168.0.254,数据走eth0接口
ip route add default via 192.168.0.254 dev eth0 # 设置默认网关为192.168.0.254
ip route del 192.168.4.0/24 # 删除192.168.4.0网段的网关
ip route del default # 删除默认路由
ip route delete 192.168.1.0/24 dev eth0 # 删除路由
用 ip 命令显示网络设备的运行状态：
[root@localhost ~]# ip link list
1: lo: mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:00:1e:51 brd ff:ff:ff:ff:ff:ff
3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:00:1e:52 brd ff:ff:ff:ff:ff:ff
显示更详细的设备信息：
[En]
Display more detailed device information:
[root@localhost ~]# ip -s link list
1: lo: mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
RX: bytes packets errors dropped overrun mcast
5082831 56145 0 0 0 0
TX: bytes packets errors dropped carrier collsns
5082831 56145 0 0 0 0
2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:00:1e:51 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
3641655380 62027099 0 0 0 0
TX: bytes packets errors dropped carrier collsns
6155236 89160 0 0 0 0
3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000
link/ether 00:16:3e:00:1e:52 brd ff:ff:ff:ff:ff:ff
RX: bytes packets errors dropped overrun mcast
2562136822 488237847 0 0 0 0
TX: bytes packets errors dropped carrier collsns
3486617396 9691081 0 0 0 0
显示核心路由表：
[root@localhost ~]# ip route list
112.124.12.0/22 dev eth1 proto kernel scope link src 112.124.15.130
10.160.0.0/20 dev eth0 proto kernel scope link src 10.160.7.81
192.168.0.0/16 via 10.160.15.247 dev eth0
172.16.0.0/12 via 10.160.15.247 dev eth0
10.0.0.0/8 via 10.160.15.247 dev eth0
default via 112.124.15.247 dev eth1
显示邻居表：
[root@localhost ~]# ip neigh list
112.124.15.247 dev eth1 lladdr 00:00:0c:9f:f3:88 REACHABLE
10.160.15.247 dev eth0 lladdr 00:00:0c:9f:f2:c0 STALE
获取主机所有网络接口：
ip link | grep -E ‘^[0-9]’ | awk -F: ‘{print $2}’
Original: https://www.cnblogs.com/leotiger/p/15893617.html
Author: 裘庄三少
Title: Linux IP 命令略解
原创文章受到原创版权保护。转载请注明出处：https://www.johngo689.com/524094/
转载文章受原作者版权保护。转载请注明原作者出处！